Regent Metal Driveway Gates (3ft) High

From: £302.40

For fitting instructions click here.

SKU: RED* Categories: ,


The Regent pair of driveway gates have an ornate design that will provide an elegant entrance to any property.
For the Regent design, the pattern will be doubled for pairs 10ft wide and over.

Metal gates are supplied with a black primer finish as standard. The gates must be painted with a good quality, rust resistant topcoat after fitting. Alternatively, there are other higher quality finish options that the gates can be supplied with. See ‘Finish Required’ option. All metal gates need to be inspected for scratches after fitting, then at least once a year for any damage to the coating and treated / painted to ensure long life.

The metal gate sizes shown are to fit an opening, not the physical gate width.
The gate design may vary slightly from images shown as it is subject to the size required.
* Please note that wrought iron style gate heights indicate the height of the gate when hung, including 50mm (2in) ground clearance.
Gate Specification
Specifics: Gates measure 914mm (3ft) high*
Frame: 20mm x 8mm solid flat bar.
Detail:10mm diameter solid infill bars, 10mm x 3mm scrolls
Fittings: Supplied with adjustable hinges; tip latch; 1 drop bolt for gates under 10ft wide, 2 drop bolts over 10ft wide. Additional drop bolts can be requested.
Posts: See ‘Optional Metal Posts’ selection
Weight: Up to 43kg
Automation:   Not suitable

Optional Finish: Electro galvanised for added rust resistance and powder coated black is available on request (for an additional charge) please call or email us for more information.

Need help choosing your gate?
Further information can be found in ‘Help & FAQ’s’.
Contact us on 01543 462500 or email

A restocking fee of £36.00 will be deducted from your refund if the gate is returned. Free postage is for UK mainland only. Outer-lying area post codes, Highlands, Islands and NI will incur an additional postage surcharge.

You may also like…