Canterbury Combi Slatted Fence Panels

From: £155.22

**PLEASE BE ADVISED THAT SOME POSTCODES MAY HAVE INCREASED DELIVERY COSTS, WE WILL CONTACT YOU IF THIS APPLIES TO YOU.**

SKU: 630*00 Category:

Description

****PLEASE BE ADVISED*****
If you live in a CA, DL or TS postcode or North of these, standard carriage charges differ please call us for a postal quote!

IF YOUR ORDER EXCEEDS £2400 THERE WILL BE A SURCHARGE ADDED TO THE COST OF DELIVERY!

Expertly handcrafted, Canterbury Combi fence panels and garden gate designs are a hybrid of two popular products: Venetian and Tongue and Groove combined to create an elegant design. These panels provide the sleek modern feel of Venetian, but they have the added benefit of extra privacy and protection that some people may prefer, with the solid Tongue and Groove Effect lower part of the panel.

The top quadrant of the Canterbury Combi panel is finished with our Venetian topper to give these premium solid panels a contemporary finish. The individual slats are planed however please note the slatted pale spacing is different on these panels when compared with a standard Venetian panel.

SPECIFICATION

  • Lower section is 1490mm high, made from premium Tongue and Groove boards
  • Upper section is 340mm high, horizontal Venetian pales
  • Panels are 51mm thick.
  • Side framing is 51mm x 45mm
  • Top and Bottom framing 70mm x 51mm
  • Rail between lower and upper sections 51mm x 45mm
  • 140mm gravel board to be bought seperately
  • Guaranteed for 25 years

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

The 25-year manufacturers guarantee on the panels is only applicable if they have gravelboards below or are raised above the ground by 50mm, if they are in contact with any soil they won’t be covered.   The posts and gravelboards are perfectly fine to be placed in ground contact.  There are links on our website to our recommended installation instructions, showing how the panels, posts and gravelboards should be installed correctly. (subject to their terms & conditions.)