Convex Tongue And Groove Panels

From: £143.40

SKU: 6581**-2 Category:

Description

****PLEASE BE ADVISED*****
If you live in a CA, DL or TS postcode or North of these, standard carriage charges differ please call us for a postal quote!

These attractive fence panels are a variation on our standard Tongue and Groove Effect panel, with the addition of a graceful arched top in a choice of 1.52m and 1.83m heights and are a mainstay of our premium range.

SPECIFICATIONS:

  • These fence panels are fully framed with 50mm top and bottom rail and 45mm side rails
  • Panels are available in two heights from 1.52m to 1.83m
  • Panels are 50mm thick.
  • Infilled with Tongue & Groove effect boards
  • Support rails of 70mm
  • Stainless steel fixings used throughout for longer life

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

The 25-year manufacturers guarantee on the panels is only applicable if they have gravelboards below or are raised above the ground by 50mm, if they are in contact with any soil they won’t be covered.   The posts and gravelboards are perfectly fine to be placed in ground contact.  There are links on our website to our recommended installation instructions, showing how the panels, posts and gravelboards should be installed correctly. (subject to their terms & conditions.)