Featherboard Concave Fence Panels

From: £49.68

**PLEASE BE ADVISED THAT SOME POST CODES MAY HAVE INCREASED DELIVERY COST, WE WILL CONTACT YOU IF IT APPLYS TO YOU.**

SKU: 635*00-1 Category:

Description

****PLEASE BE ADVISED*****
If you live in a CA, DL or TS postcode or North of these, standard carriage charges differ please call us for a postal quote!

Concave Featherboard panels offer an alternative style from the Convex and Level Top panel; they also have vertical boards but present a dipped arched style of fencing panel by curving downwards from each side of the panel.

All our standard panels are 1.83m wide and 50mm thick. Constructed with two to three rails depending on height and all weathered, clad with 100mm featherboard pales, and galvanised nails used throughout for a longer life.

eatherboard panels are one of the strongest panel fencing available. We have now improved the specification on these panels by making the top and bottom rail heavier, which creates an even stronger fence for you.

Also known as Closeboard fencing, Vertical board fencing, Closeboard Panels or Feather Edge fencing.

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

The 25-year manufacturers guarantee on the panels is only applicable if they have gravelboards below or are raised above the ground by 50mm, if they are in contact with any soil they won’t be covered.   The posts and gravelboards are perfectly fine to be placed in ground contact.  There are links on our website to our recommended installation instructions, showing how the panels, posts and gravelboards should be installed correctly. (subject to their terms & conditions.)